· Device did not appear with the intermediate firmware Check the *.log files in the scripts folder Do you want to try flashing another device? [y/N] n. I upload the logs. Thanks. smarthack-mqtt.log smarthack-psk.log smarthack-udp.log smarthack-web.log smarthack-wifi.log tuya-convert.log. EDIT: I'm sorry I think they are RDA 5981AM chip
While working with the development version the 2nd device did not start with the fast blinking LED and I was not able to start this provisioning mode while pressing the button on the device. I gave it a try and started the flashing process anyway and it seemed that this devices had booted already into the intermediate firmware and the script loaded the tasmota.bin without any problems.
Device did not appear with the intermediate firmware #486. Closed iqmend opened this issue Jan 4, 2020 · 10 ... however when the ESP reboots after loading a new firmware from Tuya-convert it spits out a load of info on the serial line, the MCU doesn’t understand so shuts down the power to the ESP, this would mean however your at step 1 of the convert process, holding the pairing button ...
Device did not appear with the intermediate firmware - Moes 3-way switch #492
After an unsuccessful attempt, I can still connect it to the Gosund app, so nothing has changed on the device. I had it paired via the Gosund app earlier, but I removed it in the app before trying to flash. The device ID is 82008006600194c2f3f3 MAC address: 60:01:94:c2:f3:f3 Firmware according to Gosund app is the most recent: 1.0.0
Press ENTER and Tuya-Convert will begin to look for the device. Patience is key here, it can take a while. If the operation times out with the “Device did not appear with the intermediate firmware” error, just power cycle your device and repeat.
No brook is too little to seek the sea.